The surface of the rubber ring needs to be kept clean during daily use to prevent dust, oil and other debris from adhering to the surface for a long time. When cleaning, you can use a soft cloth or sponge to wipe it. Do not use sharp tools to scratch the rubber ring to avoid scratches. For parts that are prone to water accumulation, they should be dried in time after cleaning to reduce the impact of long-term moisture on the rubber material.
Pay attention to avoid excessive stretching, squeezing and twisting of the rubber ring during use. When installing or disassembling, do not pry directly with sharp objects such as knives to avoid damaging the sealing lip. If the rubber ring is installed in an incorrect position, problems such as uneven local stress, deformation, and even water and oil leakage may occur. Therefore, you should confirm whether the size and installation direction are correct when replacing it.
Rubber materials are susceptible to factors such as temperature, oil, cleaning agents and sunlight. If exposed to high temperature, strong light or unsuitable chemical media for a long time, the rubber ring may harden, become brittle, and lose elasticity. Therefore, during use and storage, you should try to avoid long-term exposure to high temperatures, direct sunlight, and unsuitable chemical environments, and select matching rubber materials based on actual uses.
The condition of the rubber ring should also be checked regularly, focusing on whether there are cracks, aging, deformation, wear and loss of elasticity. If it is found that the rubber ring has been obviously damaged, it should be replaced in time instead of continuing to use it. For mechanical equipment that has been running for a long time, regular inspections can be arranged according to the usage time and working environment, so that sealing problems can be discovered in time, water leakage, oil leakage and other failures can be reduced, and the service life of the rubber ring can be extended.
